Christie GS Series Service Manual page 62

5. Remove the light engine.
See Replacing the light engine, and combiner
6. Remove the LD banks.
See Replacing the right laser driver bank
rear LD bank
7. Remove the 10 M3 screws securing fans 4 and 10.
8. Unlock the three nuts with an M6 socket driver and remove the one mylar.
9. Remove the elevator feet from the bottom cover.
10. Remove the four M3 screws securing the blue LD cover and red LD cover.
11. Remove the 19 M3 screws securing the bottom cover.
GS Series 700-850 Service Manual
020-001054-02 Rev. 1 (04-2017)
on page 77.
on page 73.
on page 76 and Replacing the front LD bank and
Fan 10
Fan 4
Elevator foot
Projector covers and feet
62