Troubleshooting; Led Status Indicators; Status Led - Christie GS Series Service Manual

Troubleshooting

Use this section for troubleshooting process.

LED status indicators

The LED indicators are located on the front and rear of the projector.

Status LED

Identify the status LED colors and meaning.
LED State
Blue Solid
Flashing
Green Solid
Flashing
Yellow Solid
Flashing
Red Solid
Flashing
White Flashing
Off
GS Series 700-850 Service Manual
020-001054-02 Rev. 1 (04-2017)
Description
Standby AC has been applied, projector is in standby mode. Projector status
is OK.
Cool down Projector is cooling down.
Projector on Lamp is on. Projector status is OK.
Startup Projector is in startup or cool down mode.
Warning in Projector is turning off while it is in a warning state.
standby
Warning with A problem exists with the projector that does not cause it to shut
lamp on down.
Examples of warnings include: filter needs changing, one of the
pumps are damaged, or a fan is operating at full speed due to over
temperature of LD driver.
Error in The projector is turning off while it is in an error state.
standby
Error with An error with the projector exists that has caused or may inevitably
lamp on cause it to shut down.
Error examples include: fan failure, over temperature, wrongly
installed filter, CW failure.
Update Projector is in flash (LAN) update state.
AC off AC power is off (without AC plug in).
40