Performing A Firmware Recovery - Christie GS Series Service Manual

d. Click Next.
7. Click Next.
8. On the Prepare to Update Projector tab, select your projector model name. Click Next.
9. Choose the firmware version that you want to upgrade to. Click Next.
10. When the firmware upgrade is complete, to verify the firmware version, enter Service Mode
and select Projector Info.
11. Click Exit.

Performing a firmware recovery

If the upgrade fails, select Restore. The upgrade resumes based on your last selection of firmware
i
and displays upgrade in progress.
To perform a firmware recovery, complete the following steps.
1. Repeat steps 1 through 9 in the firmware upgrade process, see
page 37.
2. If the model name, serial number, and firmware version are not detected automatically, on the
Update Details tab, select Restore (Continue to the last update state).
3. Click Next.
4. When the firmware upgrade is complete, to verify the firmware version, enter Service mode
and select Projector Info.
5. Click Exit.
GS Series 700-850 Service Manual
020-001054-02 Rev. 1 (04-2017)
Firmware
Upgrading the firmware on
38