Christie GS Series Service Manual page 34

Performing a wireless function test
Before performing the wireless function test, a USB dongle must connect the projector and PC Host
directly. When the connection is made, the PC shows a USB device disk.
The following browsers are supported for this test:
• Internet Explorer: IE8 for WinXP, IE9 or higher for Win7, and IE11 for Win8.1 or Win10 is
required.
• Chrome: Version 49 or higher is required.
• Firefox: Version 46 or higher is required.
• Safari: Not supported.
To perform a wireless function test, complete the following steps.
1. Connect to the wireless SSID.
a. Insert the WiFi USB dongle (1DWUSB-BGN) into the USB port on the projector input
panel.
b. Power on the projector.
c. Obtain the WiFi SSID from the on-screen display menu Main Menu > Configuration >
Communications > WLAN.
d. Connect your PC device to the wireless SSID for the selected projector.
For example: Christie@0111000123.
2. Download Christie Presenter.
a. Use Internet Explorer to navigate to http://192.168.1.100.
b. For the Access type, select Administrator.
c. Enter the password admin.
d. Click Login.
e. Click Download.
f. Click Save.
3. Install the Christie Presenter.
a. Double-click Christie Presenter.
b. Click OK.
c. Click Next.
d. Click I Agree.
e. Click Next.
f. Click Next.
g. Enter the name and click Next.
h. Click Install.
i. Select I want to manually reboot later.
GS Series 700-850 Service Manual
020-001054-02 Rev. 1 (04-2017)
Service setups
34