1. Manuals
  2. Brands
  3. Christie Manuals
  4. Projector
  5. DWU8902-GS
  6. User manual

Christie DWU8902-GS User Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
User Manual
020-001795-01
Christie GS Series
DWU8902-GS

Advertisement

Table of Contents
loading

Related Manuals for Christie DWU8902-GS

Summary of Contents for Christie DWU8902-GS

  • Page 1 User Manual 020-001795-01 Christie GS Series DWU8902-GS...
  • Page 2 The warranty does not apply to any product where the serial number has been removed or obliterated. The warranty also does not apply to any product sold by a reseller to an end user outside of the country where the reseller is located unless (i) Christie has an office in the country where the end user is located or (ii) the required international warranty fee has been paid.

  • Page 3: Table Of Contents

    Configuration Menu ..........33 GS Series DWU8902-GS User Manual 020-001795-01 Rev. 1 (04-2020) Copyright ©2020 Christie Digital Systems USA Inc. All rights reserved.
  • Page 4 On-screen display tree ......... . . 60 GS Series DWU8902-GS User Manual 020-001795-01 Rev. 1 (04-2020) Copyright ©2020 Christie Digital Systems USA Inc. All rights reserved.

  • Page 5: Introduction

    Safety and warning guidelines This projector must be operated in an environment that meets the operating range specification. Use only the attachments and/or accessories recommended by Christie. Use of others may result in the risk of fire, shock, or personal injury.

  • Page 6: Ac/Power Precautions

    Caution! If not avoided, the following could result in minor or moderate injury. • ELECTRICAL and BURN HAZARD! Use caution when accessing internal components. • Only Christie qualified technicians are authorized to use the tools provided in the toolbox. Laser safety precautions This projector has been classified as Class 1 Laser Product-Risk Group 2 according to IEC 60825- 1:2014, IEC 62471:2006, and IEC 62471-5:2015 standard.

  • Page 7: Product Labels

    Learn about the labels that may be used on the product. Labels on your product may be yellow or black and white. General hazards Hazard warnings also apply to accessories once they are installed in a Christie product that is connected to power. Fire and Shock Hazard To prevent fire or shock hazards, do not expose this product to rain or moisture.
  • Page 8 This projector has been classified as Class 1 Laser Product- Risk Group 2 according to IEC 60825-1:2014, IEC 62471:2006, and IEC 62471-5:2015. GS Series DWU8902-GS User Manual 020-001795-01 Rev. 1 (04-2020) Copyright ©2020 Christie Digital Systems USA Inc. All rights reserved.

  • Page 9: Projector Components

    Input/Output (I/O) panel Connects the projector to external devices. Built-in keypad Controls the projector. GS Series DWU8902-GS User Manual 020-001795-01 Rev. 1 (04-2020) Copyright ©2020 Christie Digital Systems USA Inc. All rights reserved.

  • Page 10: Left View

    Part Name Description Cooling air vents Provides cooling to the projector. Keep these vents unobstructed to prevent (exhaust) the projector from overheating. GS Series DWU8902-GS User Manual 020-001795-01 Rev. 1 (04-2020) Copyright ©2020 Christie Digital Systems USA Inc. All rights reserved.

  • Page 11: Built-In Keypad

    Adjusts the lens vertical or horizontal offset setting. Zoom Adjusts the zoom. Back Returns to the previous level or exits the menus if at top level. GS Series DWU8902-GS User Manual 020-001795-01 Rev. 1 (04-2020) Copyright ©2020 Christie Digital Systems USA Inc. All rights reserved.

  • Page 12: Input/Output (I/O) Panel

    DVI-D IN MINI USB VGA IN ETHERNET HDMI-OUT 3D SYNC IN HDMI-1 3D SYNC OUT REMOTE OUT HDBaseT REMOTE IN RS232 GS Series DWU8902-GS User Manual 020-001795-01 Rev. 1 (04-2020) Copyright ©2020 Christie Digital Systems USA Inc. All rights reserved.

  • Page 13: Ir Remote Keypad

    Turns the projector on. GAMMA Adjusts the mid-range levels. BRIGHT Adjusts the amount of light in the image. PIP/PBP Turns PIP/PBP on or off. GS Series DWU8902-GS User Manual 020-001795-01 Rev. 1 (04-2020) Copyright ©2020 Christie Digital Systems USA Inc. All rights reserved.
  • Page 14 Displays the source image information. LENS H Adjusts the position of the image horizontally. LENS V Adjusts the position of the image vertically. GS Series DWU8902-GS User Manual 020-001795-01 Rev. 1 (04-2020) Copyright ©2020 Christie Digital Systems USA Inc. All rights reserved.

  • Page 15: Led Status Indicators

    Projector is on and an image is displayed. Shutter is open. Magenta (solid) Projector is on and the image is blank. Shutter is closed. GS Series DWU8902-GS User Manual 020-001795-01 Rev. 1 (04-2020) Copyright ©2020 Christie Digital Systems USA Inc. All rights reserved.

  • Page 16: Installation

    • This diagram is for illustrative purposes only and does not indicate that these accessories are supplied with the projector. GS Series DWU8902-GS User Manual 020-001795-01 Rev. 1 (04-2020) Copyright ©2020 Christie Digital Systems USA Inc. All rights reserved.

  • Page 17: Connecting To Video Equipment

    • This diagram is for illustrative purposes only, and does not indicate that these accessories are supplied with the projector. GS Series DWU8902-GS User Manual 020-001795-01 Rev. 1 (04-2020) Copyright ©2020 Christie Digital Systems USA Inc. All rights reserved.

  • Page 18: Turning The Projector On

    2. To confirm your selection, press again. If you do not press again, the warning message disappears after three seconds and the projector remains on. GS Series DWU8902-GS User Manual 020-001795-01 Rev. 1 (04-2020) Copyright ©2020 Christie Digital Systems USA Inc. All rights reserved.

  • Page 19: Adjusting The Projector Position

    Lens 1.22~1.52 (WU) • Lens 1.52~2.9 (WU) • Lens 2.9~5.5 (WU) • Lens 0.36 (120’’ screen, WU) • 360 degree free orientation operation GS Series DWU8902-GS User Manual 020-001795-01 Rev. 1 (04-2020) Copyright ©2020 Christie Digital Systems USA Inc. All rights reserved.

  • Page 20: Calculating The Lens Offset

    UST lens do not support the lens shift function. WUXGA projectors The following show vertical image offsets for the WUXGA projectors: • Vertical image offset: 0% Lens center GS Series DWU8902-GS User Manual 020-001795-01 Rev. 1 (04-2020) Copyright ©2020 Christie Digital Systems USA Inc. All rights reserved.
  • Page 21 Installation • Vertical image offset: +100% Lens center • Vertical image offset: -100% Lens center GS Series DWU8902-GS User Manual 020-001795-01 Rev. 1 (04-2020) Copyright ©2020 Christie Digital Systems USA Inc. All rights reserved.

  • Page 22: Removing And Installing The Lens

    5. To remove the lens, press the Lens Release button by hand or with a tool and rotate the lens counterclockwise by a quarter to release the lock. GS Series DWU8902-GS User Manual 020-001795-01 Rev. 1 (04-2020) Copyright ©2020 Christie Digital Systems USA Inc. All rights reserved.
  • Page 23 8. To lock the lens in place, rotate the lens clockwise Notice. For ultra short throw lens installation information, refer to the Ultra short throw lens installation instruction sheet (P/N: 020-102569-XX). GS Series DWU8902-GS User Manual 020-001795-01 Rev. 1 (04-2020) Copyright ©2020 Christie Digital Systems USA Inc. All rights reserved.

  • Page 24: Installing The Ceiling Mount

    1. Refer to the installation instructions and safety guidelines provided in the mount kit. Optional accessories on page 57. Installing the projector in the rigging frame Install the projector in a Christie-approved rigging frame, using the four mounting points on the underside of the projector. on page 57. Optional accessories Warning! Failure to comply with the following could result in death or serious injury.

  • Page 25: Operation

    2. Image Settings 3. Configuration 4. Light Source 5. Status 6. Input Switching & PIP 7. Language English 8. Test Pattern GS Series DWU8902-GS User Manual 020-001795-01 Rev. 1 (04-2020) Copyright ©2020 Christie Digital Systems USA Inc. All rights reserved.

  • Page 26: Size And Position Menu

    • Overscan Zoom enlarges image 6% from the original size. • Overscan Crop cuts 6% of the active pixels in four edges of original image. GS Series DWU8902-GS User Manual 020-001795-01 Rev. 1 (04-2020) Copyright ©2020 Christie Digital Systems USA Inc. All rights reserved.
  • Page 27 For the 4:3 input sources not recognized by Wide mode (for example, 1400 x 1050), perform Auto Image using Normal mode. GS Series DWU8902-GS User Manual 020-001795-01 Rev. 1 (04-2020) Copyright ©2020 Christie Digital Systems USA Inc. All rights reserved.

  • Page 28: Geometry Correction

    4-Corner correction using the on-screen display (OSD) control or the PC App provided separately. Ind. 1080P WUXGA 5.12% 5.04% 11.00% 10.52% GS Series DWU8902-GS User Manual 020-001795-01 Rev. 1 (04-2020) Copyright ©2020 Christie Digital Systems USA Inc. All rights reserved.
  • Page 29 Horz Filter—Adjusts horizontal filter for distortion correction. • Vert Filter—Adjusts vertical filter for distortion correction. Reset Reset all Geometry Correction parameters. GS Series DWU8902-GS User Manual 020-001795-01 Rev. 1 (04-2020) Copyright ©2020 Christie Digital Systems USA Inc. All rights reserved.

  • Page 30: Image Settings Menu

    3D sync output corrector to the emitter or to the next projector for 3D blending purposes. • Frame delay—Corrects asynchronous displaying of images under 3D blending. GS Series DWU8902-GS User Manual 020-001795-01 Rev. 1 (04-2020) Copyright ©2020 Christie Digital Systems USA Inc. All rights reserved.
  • Page 31 • Color • Tint • Red Gain • Green Gain • Blue Gain • Red Offset • Green Offset • Blue Offset GS Series DWU8902-GS User Manual 020-001795-01 Rev. 1 (04-2020) Copyright ©2020 Christie Digital Systems USA Inc. All rights reserved.
  • Page 32 DMD. The higher the speed, the less rainbow effect on the screen. GS Series DWU8902-GS User Manual 020-001795-01 Rev. 1 (04-2020) Copyright ©2020 Christie Digital Systems USA Inc. All rights reserved.

  • Page 33: Configuration Menu

    • Lens Calibration—Calibrates the lens center. Ceiling Mount Turns the image upside down — for ceiling-mounted projection. GS Series DWU8902-GS User Manual 020-001795-01 Rev. 1 (04-2020) Copyright ©2020 Christie Digital Systems USA Inc. All rights reserved.
  • Page 34 • Front—Enables or disables the signal from the front IR sensor. • HDBaseT—Enables or disables the signal from the HDBaseT Box. GS Series DWU8902-GS User Manual 020-001795-01 Rev. 1 (04-2020) Copyright ©2020 Christie Digital Systems USA Inc. All rights reserved.
  • Page 35 IR remote set to address 0. Backlight Controls the back light — Preferences behavior and timeout setting for the keypad and status LED. GS Series DWU8902-GS User Manual 020-001795-01 Rev. 1 (04-2020) Copyright ©2020 Christie Digital Systems USA Inc. All rights reserved.
  • Page 36 GS Series DWU8902-GS User Manual 020-001795-01 Rev. 1 (04-2020) Copyright ©2020 Christie Digital Systems USA Inc. All rights reserved.
  • Page 37 Rental mode or after a laser diode driver has been replaced. • UST Lens Install—Performs the Ultra Short Throw (UST) lens installation process. GS Series DWU8902-GS User Manual 020-001795-01 Rev. 1 (04-2020) Copyright ©2020 Christie Digital Systems USA Inc. All rights reserved.

  • Page 38: Color Matching

    A positive hue input provides a counter-clockwise rotation of the color's hue. • A zero input does not change the hue of the color. GS Series DWU8902-GS User Manual 020-001795-01 Rev. 1 (04-2020) Copyright ©2020 Christie Digital Systems USA Inc. All rights reserved.
  • Page 39 A gain of 127 is the nominal setting. • White provides three gain level controls, one each for the R,G,B component of white. GS Series DWU8902-GS User Manual 020-001795-01 Rev. 1 (04-2020) Copyright ©2020 Christie Digital Systems USA Inc. All rights reserved.

  • Page 40: Light Source Menu

    • LD Hours—Displays the current total number of hours the laser diode has been used. Light Sensor Calibrates the light sensor. — Calibration GS Series DWU8902-GS User Manual 020-001795-01 Rev. 1 (04-2020) Copyright ©2020 Christie Digital Systems USA Inc. All rights reserved.

  • Page 41: Status Menu

    Light Source Power Total Projector Hours Light Source Hours Standby Mode Communication Mode Lens Lock Settings Allow IP Address DHCP System Temperature GS Series DWU8902-GS User Manual 020-001795-01 Rev. 1 (04-2020) Copyright ©2020 Christie Digital Systems USA Inc. All rights reserved.

  • Page 42: Input Switching & Pip Menu

    Auto Image using Normal mode. Source Info Displays the current source settings. (Read- — only) Input key Lists or changes the sources. — GS Series DWU8902-GS User Manual 020-001795-01 Rev. 1 (04-2020) Copyright ©2020 Christie Digital Systems USA Inc. All rights reserved.

  • Page 43: Pip/Pbp Layout And Size

    Large PBP, Bigger Left Over-Under, Bigger Upper PBP, Bigger Right Over-Under, Bigger Lower PIP-Bottom Right PIP-Bottom Left PIP-Top Left PIP-Top Right GS Series DWU8902-GS User Manual 020-001795-01 Rev. 1 (04-2020) Copyright ©2020 Christie Digital Systems USA Inc. All rights reserved.

  • Page 44: Language Menu

    Choose the required internal test pattern to display, or select Off to turn off a test pattern. Test Pattern 1. Off 2. Grid 3. White 4. Black 5. Checkerboard 6. Color Bars GS Series DWU8902-GS User Manual 020-001795-01 Rev. 1 (04-2020) Copyright ©2020 Christie Digital Systems USA Inc. All rights reserved.

  • Page 45: Using Web User Interface

    192.168.000.xxx, where xxx is not 100. 4. Open a web browser and type the projector address in the browser address bar. GS Series DWU8902-GS User Manual 020-001795-01 Rev. 1 (04-2020) Copyright ©2020 Christie Digital Systems USA Inc. All rights reserved.

  • Page 46: Setting The System Notification

    SNMP Trap and Email—Send the notification to the trap receiver and the email recipient. 4. To apply the notification settings, click Save. GS Series DWU8902-GS User Manual 020-001795-01 Rev. 1 (04-2020) Copyright ©2020 Christie Digital Systems USA Inc. All rights reserved.

  • Page 47: Troubleshooting

    Verify the resolution setting is lower than or equal to WUXGA (1920 × 1200). b. Switch to the Monitor tab. c. Click Change. GS Series DWU8902-GS User Manual 020-001795-01 Rev. 1 (04-2020) Copyright ©2020 Christie Digital Systems USA Inc. All rights reserved.

  • Page 48: Presentation Is Not Displayed

    Some Notebook PCs may deactivate their own screens when a second display device is in use. Each has a different method of reactivation. Resolution Refer to your computer manual for information on changing the method of reactivation. GS Series DWU8902-GS User Manual 020-001795-01 Rev. 1 (04-2020) Copyright ©2020 Christie Digital Systems USA Inc. All rights reserved.

  • Page 49: Unstable Or Flickering Images

    When you play anamorphic DVD or 16:9 DVD, the projector shows the best image if the projector display mode is set to 16:9 in the on-screen display. GS Series DWU8902-GS User Manual 020-001795-01 Rev. 1 (04-2020) Copyright ©2020 Christie Digital Systems USA Inc. All rights reserved.

  • Page 50: Image Is Not The Correct Size

    Adjust the lens zoom to fit. • Verify you are using the correct lens. • Change the position of the projector. GS Series DWU8902-GS User Manual 020-001795-01 Rev. 1 (04-2020) Copyright ©2020 Christie Digital Systems USA Inc. All rights reserved.

  • Page 51: Specifications

    Specifications Learn about the product specifications. Due to continuing research, specifications are subject to change without notice. Inputs The following table details the inputs for DWU8902-GS. RB in the Resolution column indicates reduced blanking. Signal Resolution Frame QD881 HDMI HDBaseT 3G-SDI...
  • Page 52 ● ● ● 1360x768 DMT1360H ● ● ● 1360x768 CVT1375H ● ● ● 1360x768 CVT1385H ● ● ● ● 1366x768 DMR1360H GS Series DWU8902-GS User Manual 020-001795-01 Rev. 1 (04-2020) Copyright ©2020 Christie Digital Systems USA Inc. All rights reserved.
  • Page 53 1080p ● ● ● ● 1080p ● ● ● ● 1080p ● ● ● ● 1080p ● ● ● ● 1080p GS Series DWU8902-GS User Manual 020-001795-01 Rev. 1 (04-2020) Copyright ©2020 Christie Digital Systems USA Inc. All rights reserved.
  • Page 54 ● 10bit ● 576i YcbCr422 10bit HD-SDI 720p YcbCr422 ● 10bit 59.94 ● ● 1080i ● YcbCr422 10bit 59.94 ● ● GS Series DWU8902-GS User Manual 020-001795-01 Rev. 1 (04-2020) Copyright ©2020 Christie Digital Systems USA Inc. All rights reserved.

  • Page 55: Pip/Pbp Compatibility

    Mini USB ● ● ● Ethernet RJ45- • Dot (●): PIP/PBP combinations are enabled. • Dash (-): PIP/PBP combinations are disabled. GS Series DWU8902-GS User Manual 020-001795-01 Rev. 1 (04-2020) Copyright ©2020 Christie Digital Systems USA Inc. All rights reserved.

  • Page 56: Key Features

    AC power cord (China) • Product Safety Guide Due to the difference in applications for each country, some regions may have different accessories. GS Series DWU8902-GS User Manual 020-001795-01 Rev. 1 (04-2020) Copyright ©2020 Christie Digital Systems USA Inc. All rights reserved.

  • Page 57: Optional Accessories

    30 kg (66.3 lb.) Operating position 360 degrees front to back and portrait capable Free orientation and no tilt range constraint GS Series DWU8902-GS User Manual 020-001795-01 Rev. 1 (04-2020) Copyright ©2020 Christie Digital Systems USA Inc. All rights reserved.

  • Page 58: Physical Operating Environment

    If the end-user presses the source key on the IR remote keypad that is not supported, for example BNC(2), the projector displays the following warning: Not supported GS Series DWU8902-GS User Manual 020-001795-01 Rev. 1 (04-2020) Copyright ©2020 Christie Digital Systems USA Inc. All rights reserved.

  • Page 59: Regulatory

    China Ministry of Information Industry Order No.39 (02/2006) on the control of pollution caused by electronic information products, the hazardous substances concentration limits (SJ/T11363-2006), and the applicable product marking requirement (SJ/T11364-2006). GS Series DWU8902-GS User Manual 020-001795-01 Rev. 1 (04-2020) Copyright ©2020 Christie Digital Systems USA Inc. All rights reserved.

  • Page 60: Federal Communications Commission (Fcc) Warning

    Digital Vert 50% to 400% Zoom Digital Horz 0 to 100 Shift Digital Vert Shift 0 to 100 Geometry PC Mode Correction GS Series DWU8902-GS User Manual 020-001795-01 Rev. 1 (04-2020) Copyright ©2020 Christie Digital Systems USA Inc. All rights reserved.
  • Page 61 Filter Manual Warp Horz Filter 0 to 9 Filter Vert Filter 0 to 9 Reset Command Auto Image Normal Wide Wide GS Series DWU8902-GS User Manual 020-001795-01 Rev. 1 (04-2020) Copyright ©2020 Christie Digital Systems USA Inc. All rights reserved.
  • Page 62 To Next Projector Frame Delay 1~ n (by timing,Max 200) Video Options Color 0 to 100 Tint 0 to 100 Detect Film GS Series DWU8902-GS User Manual 020-001795-01 Rev. 1 (04-2020) Copyright ©2020 Christie Digital Systems USA Inc. All rights reserved.
  • Page 63 Image Freeze Advanced Image Gamma Video By source set Settings Film Bright DICOM White Peaking 0 to 100 By source set GS Series DWU8902-GS User Manual 020-001795-01 Rev. 1 (04-2020) Copyright ©2020 Christie Digital Systems USA Inc. All rights reserved.
  • Page 64 Menu Vert Offset 0 to 100 Show Messages Menu 0 to 90 Transparency Splash Screen Factory Logo Factory Logo Setup Blue Black White GS Series DWU8902-GS User Manual 020-001795-01 Rev. 1 (04-2020) Copyright ©2020 Christie Digital Systems USA Inc. All rights reserved.
  • Page 65 2 Hrs 4 Hrs 6 Hrs Cool Down Instant Off Instant Off 1 Min 2 Min High Altitude IR Control Front HDBaseT GS Series DWU8902-GS User Manual 020-001795-01 Rev. 1 (04-2020) Copyright ©2020 Christie Digital Systems USA Inc. All rights reserved.
  • Page 66 9600 14400 19200 38400 57600 115200 1200 Serial Port Echo Serial Port Path RS232 RS232 HDBaseT Projector 0 to 9 Address GS Series DWU8902-GS User Manual 020-001795-01 Rev. 1 (04-2020) Copyright ©2020 Christie Digital Systems USA Inc. All rights reserved.
  • Page 67 0 to 1000 1000 White Green Part of 0 to 1000 1000 White Blue Part of 0 to 1000 1000 White GS Series DWU8902-GS User Manual 020-001795-01 Rev. 1 (04-2020) Copyright ©2020 Christie Digital Systems USA Inc. All rights reserved.
  • Page 68 Blue 0 to 254 Reset to Default Color Enhance CE 1 CE 1 CE 2 Wall Color White White Gray 130 GS Series DWU8902-GS User Manual 020-001795-01 Rev. 1 (04-2020) Copyright ©2020 Christie Digital Systems USA Inc. All rights reserved.
  • Page 69 Lens Lock Settings Wheel Index Factory Reset Command Test Pattern Grid White Black Checkerboard Color Bars Green Blue Yellow Magenta Cyan Boresight GS Series DWU8902-GS User Manual 020-001795-01 Rev. 1 (04-2020) Copyright ©2020 Christie Digital Systems USA Inc. All rights reserved.
  • Page 70 Temperature Voltage/ Current/ Temperature Voltage/ Current/ Temperature Voltage/ Current/ Temperature ADC Calibration Calibration Condition Calibration Light Sensor Light Source Info Calibration GS Series DWU8902-GS User Manual 020-001795-01 Rev. 1 (04-2020) Copyright ©2020 Christie Digital Systems USA Inc. All rights reserved.
  • Page 71 Firmware Vxx, Ayy, Bzz Main Input Main Signal Format Main Pixel Clock Main Sync Type Main Horz Refresh Main Vert Refresh GS Series DWU8902-GS User Manual 020-001795-01 Rev. 1 (04-2020) Copyright ©2020 Christie Digital Systems USA Inc. All rights reserved.
  • Page 72 PBP, Main Top/ PBP, Main Right/ PBP, Main Bottom/PIP- Bottom Right/ PIP-Bottom Left/ PIP-Top Left/ PIP-Top Right) Timing Normal Wide Detection Mode Wide GS Series DWU8902-GS User Manual 020-001795-01 Rev. 1 (04-2020) Copyright ©2020 Christie Digital Systems USA Inc. All rights reserved.
  • Page 73 List All Sources Auto Source Blank on Signal Switch Language SPEC define English Test pattern Grid White Black Checkerboard Color Bars GS Series DWU8902-GS User Manual 020-001795-01 Rev. 1 (04-2020) Copyright ©2020 Christie Digital Systems USA Inc. All rights reserved.
  • Page 74 Corporate of ces Worldwide of ces Christie Digital Systems USA, Inc. Australia Germany Republic of South Africa United Kingdom Cypress ph: +61 (0) 7 3624 4888 ph: +49 2161 664540 ph: +27 (0)11 510 0094 ph: +44 (0) 118 977 8000...

This manual is also suitable for:

Gs series

Table of Contents