Page 1
Installation and Setup Guide 020-103314-12 Christie Griffyn Series...
Page 2
Christie's control such as maintenance of the product in proper working conditions. Performance specifications are based on information available at the time of printing. Christie makes no warranty of any kind with regard to this material, including, but not limited to, implied warranties of fitness for a particular purpose.
Page 4
Connecting Christie Link video source........
Page 5
Setting up the Ethernet..........81 Communicating with Christie Griffyn Series through Art-Net..... . 81 Configuring the 3D Sync in/3D Sync out interface.
The illustrations in this document are for representation only and may not depict your projector model exactly. Only Christie qualified technicians who are knowledgeable about the hazards associated with laser use, high-voltage, and the high temperatures generated by the projector lasers are authorized to assemble, install, and service the projector.
Read all safety and warning guidelines before installing or operating the projector. This projector must be operated in an environment that meets the operating range specification. Use only the attachments and/or accessories recommended by Christie. Use of others may result in the risk of fire, shock, or personal injury.
• ELECTRICAL and BURN HAZARD! Use caution when accessing internal components. • Only Christie qualified technicians are authorized to use the tools provided in the toolbox. AC power precautions Read all safety and warning guidelines before connecting to AC power.
Possible hazardous optical radiation emitted from this product. (Risk group 3) • Only Christie qualified technicians who are knowledgeable about the hazards associated with laser use, high-voltage, and high temperatures generated by the product are authorized to assemble, install, and service the Christie Laser Projection System.
Page 10
E—Represents the top view of the projector. • F—Represents the side view of the projector. The following table lists the hazard distance for the Christie projector lens with the zoom adjusted to its most hazardous position. Griffyn 4K32-RGB Projection Lens...
• Temporary show installations containing Risk Group 3 laser-illuminated projectors may be installed by Christie or sold or leased only to valid laser light show variance holders (laser light show manufacturers) for image projection applications. Such manufacturers may currently hold a valid variance for production of Class IIIb and IV laser light shows and/or for incorporation of the Risk Group 3 laser-illuminated projectors into their shows.
Page 16
Introduction Fire and Shock Hazard Only Christie qualified technicians are authorized to service the product. Electrical Hazard Risk of electric shock. Do not remove the product enclosure. Only Christie qualified technicians are authorized to service the product. Warning! If not avoided, the following could result in death or serious injury.
Christie Griffyn Series is a professional quality 3DLP ® RGB laser projector. The high-brightness Christie Griffyn Series is designed to meet the special demands found in large venues, live events, and high- ™ usage environments. With reliable Christie RealLaser illumination integrated in a rugged chassis and ™...
003-005538-XX — Fixed Lens Conversion kit 003-005537-XX — Technical support Technical support for Christie Enterprise products is available at: • North and South America: +1-800-221-8025 or Support.Americas@christiedigital.com • Europe, Middle East, and Africa: +44 (0) 1189 778111 or Support.EMEA@christiedigital.com •...
Installation and setup Learn how to install, connect, and optimize the projector display. Site requirements To safely install and operate the Christie Griffyn Series projectors, the installation location must meet these minimum requirements. Physical operating environment • Ambient temperature (operating) 5 to 40°C (41 to 104°F) up to 457.2 meters (1,500 feet) •...
Installation and setup Power requirements Learn the power requirements for Christie Griffyn Series. Griffyn 4K32-RGB Parameter Requirement Rated voltage 200-240 VAC single phase Rated current 13 A maximum Line frequency 50/60 Hz Maximum power draw 2600 W Power connector IEC-60320 C20 inlet...
Receives transmissions from the IR remote. Service door Provides access to the fold mirror, optical zoom/focus, and digital micromirror device (DMD) convergence adjustments as well as the tools for Christie qualified technicians. Display panel Displays the projector menus and status.
1. To adjust the vertical position of the projector, extend or retract the adjustable feet on the bottom of the projector using the adjustable knobs on the feet. Christie recommends adjusting the feet from the side or rear of the projector and not the front to avoid exposure to the output light.
Installation and setup Installing the projector lens Only use lenses designed for Christie Griffyn Series projectors. Installing a lens not designed for Christie Griffyn Series, results in a warning that the lens is not present. 1. Turn off the lasers.
For best convergence results, Christie recommends disabling all geometry and color (set the color correction mode to Max Drive) correction before adjusting convergence.
Page 47
Electronically adjusting convergence with the remote Use the electronic convergence feature with the remote to adjust convergence. If warping with Christie Twist or Mystique, make sure the warp files are disabled before entering the electronic convergence feature. Christie Griffyn Series Installation and Setup Guide 020-103314-12 Rev.
Page 50
DMD convergence, Christie recommends completing mechanical convergence prior to making electronic adjustments. If warping with Christie Twist or Mystique, adjust the convergence mechanically. Do not use the electronic convergence feature. 1. Before adjusting DMD convergence, make sure the projector has reached a steady operational state.
The system optimizes the active signal and displays a progress message on screen. Disposing of the product packaging Once the product has been installed and set up, Christie recommends reusing or recycling the product packaging according to your local regulations.
The following image formats are supported by the two HDMI 2.0 inputs (A in the VOM-IF and VOM-HBI Video Input panel images). • In the tables below all 1920x1200 and 3840x2400 formats only apply to Christie M 4K+25 RGB. • In the tables below all 2048x1080 and 4096x1260 formats only apply to Christie Eclipse, Christie M 4K25 RGB, and Griffyn Series.
The following image formats are supported by the HDMI 2.1 input (L in the VOM-HBI Video Input panel image). • In the tables below all 1920x1200 and 3840x2400 formats only apply to Christie M 4K+25 RGB. • In the tables below all 2048x1080 and 4096x1260 formats only apply to Christie Eclipse, Christie M 4K25 RGB, and Griffyn Series.
The following image formats are supported by the DisplayPort inputs (C in the VOM-IF and VOM-HBI Video Input panel images). • In the tables below all 1920x1200 and 3840x2400 formats only apply to Christie M 4K+25 RGB. • In the tables below all 2048x1080 and 4096x1260 formats only apply to Christie Eclipse, Christie M 4K25 RGB, and Griffyn Series.
(per input) Connecting Christie Link video source For the projector to accept digital video data from Christie Link, plug the source directly into the Video Input panel (D in the VOM-IF and VOM-HBI Video Input panel images). For more details on the VOM-IF and VOM-HBI Video Input panels, see Video Input panel (on page 52).
Christie Link video loop-out enables signals received on the Christie Link input (labeled Christie Link 1 on the Video Input panel) to be passed through to the Christie Link output (labeled Christie Link 2 on the Video Input panel). The loop through connection is automatically established whenever active Christie Link QSFP modules are plugged into the respective connectors on the projector's Video Input panel.
Page 75
8bpc 1600x1200 8bpc 1920x1200 8bpc One-port 3D The following one-port 3D HDMI 2.0 image formats are supported by the Christie Link 4K input where the specified frame rate below is per eye. Format Cables Frame Rate (Hz) Sampling Bit-Depth 1280x720...
8/10bpc Two Column mode 4:4:4 Two-port 3D The following two-port 3D image formats are supported in a 3D frame sequential, two-column transmission format by Christie Link. All frame rates are expressed per eye. Format Cables Frame Rate Sampling Bit-Depth Notes...
Connecting an SDVoE video source For the projector to accept digital video data from a Christie Terra Transmitter, plug the SDVoE source directly into the SFP+ connector on the Video Input panel (E in the VOM-IF and VOM-HBI Video Input panel images).
Communicate with a remote computer, server, or an existing network using a RJ-45 cable. The port located on the Video Input panel uses the Christie proprietary protocol or Art-Net control protocol and is intended for Christie accessories or automation controllers only.
Ethernet is set up to obtain an IP address automatically if a DHCP server is on the network, modify IP settings, or manually enter an address. Christie recommends using the Ethernet port on the Video Input panel as the HDBaseT port is limited to 100 Mb/s.
Page 82
There are 512 channels per universe. Christie Griffyn Series specifies 24 channels. Christie Griffyn Series has multiple methods of being controlled in addition to Art-Net. If a setting is changed through another interface, the DMX controller can re-assert control by changing the value on the appropriate DMX channel.
The 3D sync interface is supported for 3D-enabled projectors (I in the VOM-IF and VOM-HBI Video Input panel images). A Mirage license is required. Only applies: Christie M RGB Series and Griffyn Series Christie Griffyn Series Installation and Setup Guide 020-103314-12 Rev.
HBI) is a micro 75 ohm BNC connector. Configuring the RS232 port Configure the RS232 port to send Christie serial commands using a standard RS232 serial cable (O in the VOM-IF and VOM-HBI Video Input panel images). For more details on the VOM-IF and VOM-HBI Video Input panels, see Video Input panel (on page 52).
3D source material. Hardware requirements Understand the hardware requirements for stereo 3D applications. • Christie Griffyn Series projector with a Mirage license • 3D stereo sync cable for direct-input 3D (and frame doubled) • A source, usually a computer with a 3D graphics card(s) •...