Replacing The Light Engine, And Combiner - Christie GS Series Service Manual

Replacing the light engine, and combiner

To remove the light engine, and combiner module, complete the following steps.
1. Remove the top cover.
See Removing the top cover
2. Remove the HDMI extender board.
See Replacing the HDMI extender board
3. Remove the main board.
See Replacing the main board and I/O board
4. Remove the power supply.
See Removing the power supply
5. Remove the 11 M3 screws securing the engine module.
6. Unplug the six connectors from the blue LD bank.
7. Remove the cables from cable tie.
8. Remove the color wheel.
See Replacing the color wheel
9. Replace the combiner module.
GS Series 700-850 Service Manual
020-001054-02 Rev. 1 (04-2017)
on page 57.
on page 78.
on page 68.
Black
Purple
Brown
on page 72.
on page 78.
Black
Purple
Brown
Optics
73