14.3.2
User Defined Screen
Parameter
Screen type
Screen name
2 measured values, numerical
Display 1, numerical
Display 2, numerical
4 measured values, numerical
Display 1, numerical
Display 2, numerical
Display 3, numerical
Display 4, numerical
2 measured values, graphical
and numerical
Display 1, graph./num.
Display 2, graph./num.
3 measured values, graphical
and numerical
Display 1, graph./num.
Display 2, graph./num.
Display 3, graph./num.
Display x, graph./num.
(x = 1 to 3)
Min value
Max value
SENTRON PAC5100/5200, 7KM5212/5412, Device Manual
E50417-H1040-C568-A1, Edition 03.2015
Default Setting
-none-
-none-
2 measured values, numerical
4 measured values, numerical
2 measured values, graphical + numerical
3 measured values, graphical + numerical
USER_SCREEN_x
any
(x = 1 to 4)
-none-
-none-
Va; Vb; Vc
Vab; Vbc; Vca
Ia; Ib; Ic
VN; Vavg
-none-
IN; Iavg
Pa; Pb; Pc; P
Qa; Qb; Qc; Q
Sa; Sb; Sc; S
cos (a); cos (b); cos (c); cos
PFa; PFb; PFc; PF
-none-
UIa; UIb; UIc; UI
f
U
Iunbal
THDS Va, THDS Vb, THDS Vc
-none-
THDS Ia, THDS Ib, THDS Ic
ab V, ca V
ab I, ca I
Q1a, Q1b, Q1c; Q1
Pinst (a-n), Pinst (b-n),Pinst (c-n)
Pst (a-n), Pst (b-n),Pst (c-n)
Plt (a-n), Plt (b-n),Plt (c-n)
Pinst (a-b), Pinst (b-c),Pinst (c-a)
Pst (a-b), Pst (b-c),Pst (c-a)
Plt (a-b), Plt (b-c),Plt (c-a)
(Setting ranges pending from network
type)
The minimum and maximum value is
1.0
defined by the selected parameters (see
10.0
chapter 7.3.3.1.1).
(unit according to
measured value)
14 Operating Parameters
Setting Range
2
14.3 HMI
251