Siemens SENTRON PAC5200 Device Manual page 159

7.4.2.1 Events
Default Settings and Setting Options
Table 7-20Value View and Evaluation - Events
Parameter
Event record type
Start time
End Time
Measurement output
To display the values on the screen, proceed as follows:
✧
In the navigation window, select the Evaluation and Data Management menu and click Events.
The Events input/output window opens.
Figure 7-48
✧
Select the desired Event record type in the list box according to Table 7-20 and specify the Start time
and End time using the calendar function.
✧ Select from the Measurement output list box whether the measured values are to be output as a Table
or a CSV file is to be created.
SENTRON PAC5100/5200, 7KM5212/5412, Device Manual
E50417-H1040-C568-A1, Edition 03.2015
Default Setting
Supply Voltage
Current date/time
Current date/time
Table
Value View and Evaluation Tab, Events Input/Output Window, Supply Voltage
7.4 Value View and Evaluation
Setting Options
Supply Voltage
Frequency
Unbalance
Any with calendar function
Time format: depends on date/time format config.
Any with calendar function
Time format: depends on date/time format config.
Table
CSV
7 Operation at Use of a PC
159