Table of Contents
Advertisement
SITRANS FM100
Parameter table Output 1/2 – Part volume
Sub-
Sub-
parameter
parameter
level 1
level 2
Disabled
Pulse unit
Pulse output
Pulse
volume
Pulse width
Control input
(only Out1)
KofiCom
Factory calibration mode on output 1
(only OUT1)
IO-Link
This mode activates the IO-Link function on output 1
(only OUT1)
10.7 User service
The user service provides the user with a reset function and password setting.
Together with the activation of a user password, therefore, the menu access for
the user on the part of a master user can be blocked.
10.7.1
In the factory setting the user password is set to "00000", the user functions are
thus freely accessible. If the user password is changed to other than "00000", the
password prompt becomes active the next time the user menu is entered.
If the set password is no longer known, a master password can be requested
from Siemens.
10.7.2
By activating this function, the user can reset the device to the factory settings.
Any user settings will then be lost and the device will be back in delivery
condition.
page 38
Sub-
parameter
Description
level 3
Output deactivated
Sets the Pulse
List
Volume for Pulse
selection
Volume
Sets the value for the
pulse volume
Value input
Sets the pulse width
Control function for
counter reset
User service / change password
User service / factory setting
Value range /
Standard
value list
value LPM
disabled
ml, L, m3,
galUS, galUK,
L
User
0-999
1
1-20.000
1 ms
OFF, memory
Off
reset
A5E48762204-AA
Standard
value
GPM
galUs
Advertisement
Table of Contents
