Siemens SENTRON PAC5200 Device Manual page 187

✧
Configure a limit violation indication on the Configure tab, Limits 1-8 item (see Automation Functions) as
follows:
Figure 7-74
✧
Configure binary output G1/3 on the Configure tab, Binary outputs item (see Binary Outputs) as follows:
Figure 7-75
SENTRON PAC5100/5200, 7KM5212/5412, Device Manual
E50417-H1040-C568-A1, Edition 03.2015
7.6 Example of a Parameterization and Measured Value Evaluation for SENTRON PAC5200
Configure Tab, Measurand Limits Example
Configure Tab, Binary Outputs Example
7 Operation at Use of a PC
187