Cancel
To cancel the configuration, proceed as follows:
✧
In the navigation window, select the Finish configuration menu and click Cancel.
Figure 7-18
✧
Click Cancel in the input/output window.
NOTE
After clicking Cancel, the active set of parameters is copied into the passive set of parameters. This action is
the same as Get device configuration Get active configuration described in Get Device Configuration.
After you have clicked Cancel, the parameterization is released and can be run from a different computer if
necessary.
SENTRON PAC5100/5200, 7KM5212/5412, Device Manual
E50417-H1040-C568-A1, Edition 03.2015
Configure Tab, Cancel Input/Output Window
7 Operation at Use of a PC
7.3 Configuration of the Device
113