Siemens SENTRON PAC5200 Device Manual page 132

7 Operation at Use of a PC
7.3 Configuration of the Device
7.3.4.2 User Defined Screens
In the User defined screen menu you can parameterize up to 4 different User screens. Each Screen type
allows you to select whether to display the measured values numerically (2 or 4 measured values) or
graphically and numerically (2 or 3 measured values). To select which of the 4 screens is presently displayed
on the device, you must use the device softkeys and the HTML page.
Default Settings and Setting Ranges
Table 7-9
Parameter
Screen type
Screen name
2 measured values, numerical
Display 1, numerical
Display 2, numerical
4 measured values, numerical
Display 1, numerical
Display 2, numerical
Display 3, numerical
Display 4, numerical
2 measured values, graphical
and numerical
Display 1, graph./num.
Display 2, graph./num.
3 measured values, graphical
and numerical
Display 1, graph./num.
Display 2, graph./num.
Display 3, graph./num.
Display x, graph./num.
(x = 1 to 3)
Min value
Max value
1)
If you have not made any selection, the displays explained in the following do not exist.
132
Settings of User Screens
-none-
USER_SCREEN_x
(x = 1 to 4)
-none-
-none-
-none-
-none-
1.0
10.0
(unit according to
measured value)
Default Setting
1)
-none-
2 measured values, numerical
4 measured values, numerical
2 measured values, graphical + numerical
3 measured values, graphical + numerical
any
Acc. to list box
(see Operating Parameters)
Acc. to list box
(see Operating Parameters)
Acc. to list box
(see Operating Parameters)
Acc. to list box
(see Operating Parameters)
The minimum and maximum value are
defined by the selected parameters (see
AC Measurement).
SENTRON PAC5100/5200, 7KM5212/5412, Device Manual
Setting Range
E50417-H1040-C568-A1, Edition 03.2015