Siemens SENTRON PAC5200 Device Manual page 165

7.4.2.3 Power Quality Report
Default Settings and Setting Options
Table 7-22
Parameter
Start Time
End Time
Record list
To display the values on the screen, proceed as follows:
✧ In the navigation window, select the Evaluation and Data Management menu and click Power quality
report.
The Power quality report input/output window opens.
Figure 7-51
✧
Enter the Start time and End time using the calendar function.
✧ Click Generate report.
The report is displayed in a separate window and can be printed out or saved.
SENTRON PAC5100/5200, 7KM5212/5412, Device Manual
E50417-H1040-C568-A1, Edition 03.2015
Power Quality Report
Default Setting
Current time
Current time
no
Value View and Evaluation Tab, Power Quality Report Input/Output Window
7.4 Value View and Evaluation
Setting Options
Any with calendar function
Time format: depends on date/time format config.
Any with calendar function
Time format: depends on date/time format config.
List of reports created within the parameterized
time
7 Operation at Use of a PC
165