7.3.3.1.2
Binary Outputs
Default Settings and Setting Ranges of the Binary Outputs
Table 7-4
Source type
Source Type Indication
Indication
Source inverted
Operating mode
Output time for pulse operating mode
(setting only possible if operating
modes Pulse and Pulse with retrig-
ger)
Source Type Energy Counter
Energy counter
Energy increase per pulse
Output time for pulse operating mode
SENTRON PAC5100/5200, 7KM5212/5412, Device Manual
E50417-H1040-C568-A1, Edition 03.2015
Settings of Binary Outputs
Parameter
Default Setting
Indication
Indication
Energy counter
-none-
Acc. to list box
(see Operating Parameters)
no
no
yes
Persistent
Persistent
Persistent with fail safe
Pulse
Pulse with retrigger
20 * 10 ms = 200 ms
50 ms to 3 600 000 ms
-none-
Acc. to list box
(see Operating Parameters)
1.0 Wh
0.1 Wh/VAh/varh to 1 000 000 Wh/VAh/
varh
20 * 10 ms = 200 ms
50 ms to 3 600 000 ms
7 Operation at Use of a PC
7.3 Configuration of the Device
Setting Range
119