Enabling Javascript - Siemens SENTRON PAC5200 Device Manual

7 Operation at Use of a PC
7.2 Start and Design of the User Interface
NOTE
When starting the device for the first time, a set of parameters with factory settings is loaded. You can modify
these settings during the parameterization (see Configuration of the Device).
To set a different user language for the user interface, open the Administrative menu on the Configure tab,
select the Device and language menu item and change the language as described in Device and Language.
NOTE
If the user interface does not open or the displayed user interface does not show the view depicted in Figure
7-3, JavaScript may be the cause. The operation of user interface requires JavaScript. You may have to
activate JavaScript as described in the following chapter.
7.2.2

Enabling JavaScript

The operation of the user interface requires JavaScript.
Enable JavaScript as follows:
✧
Start Microsoft Internet Explorer.
✧
Select the Tools menu on the menu bar of Microsoft Internet Explorer.
✧ Select Internet options... from the Tools menu.
✧
In the Internet options dialog, open the Security tab.
Figure 7-2
98
Enabling JavaScript
SENTRON PAC5100/5200, 7KM5212/5412, Device Manual
E50417-H1040-C568-A1, Edition 03.2015