Hmi - Siemens SENTRON PAC5200 Device Manual

7 Operation at Use of a PC
7.3 Configuration of the Device
7.3.4

HMI

7.3.4.1 Display Settings
Default Settings and Setting Ranges
Table 7-8
Parameter
Contrast
Time until dimmed
Refresh time
Inverse display
Phase label
Use password
To change the properties of the display, proceed as follows:
✧
In the navigation window, select the HMI menu and click LCD Property.
Figure 7-33
130
Display Settings
Default Setting
8
10
1000
no
(L1,L2,L3)
yes
Configure Tab, Display Settings Input/Output Window
Setting Range
0 to 10
0 min to 99 min
330 ms to 3000 ms
no
yes
(L1,L2,L3)
(a,b,c)
no
yes
SENTRON PAC5100/5200, 7KM5212/5412, Device Manual
E50417-H1040-C568-A1, Edition 03.2015