Administrative; Time Synchronization - Siemens SENTRON PAC5200 Device Manual

14 Operating Parameters

14.5 Administrative

14.5 Administrative
The following administrative settings are available:
•

Time Synchronization

• Ethernet Communication
• 2) After enabling the parameter changes, any currently active Modbus TCP connections will be closed.
The Modbus TCP client must later re-open these connections.
• 2) After enabling the parameter changes, any currently active Modbus TCP connections will be closed.
The Modbus TCP client must later re-open these connections.Device and Language
14.5.1 Time Synchronization
Source time synchronization
Time zone offset to UTC
Daylight Saving Time switchover
DST offset to UTC
Start of DST
End of DST
Primary NTP server IP Address
Secondary NTP server IP Address
Error indication after
Error indication after
258
Parameter
Additional Parameters if the Source is Ethernet NTP
Additional Parameter if the Source is Fieldbus
Default Settings
Internal
+00:00
yes
+01:00
March
Last week
Sunday
02:00 AM
October
Last week
Sunday
03:00 AM
192.168.0.254
192.168.0.253
10 min
10 min
SENTRON PAC5100/5200, 7KM5212/5412, Device Manual
Setting Range
Internal
Ethernet NTP
Fieldbus
-12 to +13 (hours)
(in increments of 0.5 h)
no
yes
0 to + 2 (hours)
(in increments of 0.5 h)
January to December
First week
Second week
Third week
Fourth week
Last week
Sunday to Saturday
0:00 to 23:00 (full hour)
January to December
First week
Second week
Third week
Fourth week
Last week
Sunday to Saturday
0:00 to 23:00 (full hour)
Any
Any
No polling of the NTP server if 0.0.0.0
was entered
2 min to 120 min
2 min to 120 min
E50417-H1040-C568-A1, Edition 03.2015