Setting The Operational Parameters - Siemens SENTRON PAC5200 Device Manual

7.3.3

Setting the Operational Parameters

In the Configure tab you can view and edit the set operational parameters. You can select the parameters in
the Operational menu in the navigation window. The submenus Process connections, Select automation
function, HMI, PQ Management and Administrative are available for making the settings. The submenus
contain the following elements:
• Process connections

AC measurement

Binary outputs

LEDs
• Select automation functions

Measurand limits 1-8

Measurand limits 9-16

Group indications 1-4
NOTE
Observe the procedure for the device configuration described in Device Configuration Procedure when you set
the operational parameters.
NOTE
If you change the Network type during ongoing operation, check the settings, measured values, and limiting
values for inconsistencies. Check also the ICD file which is suitable for the network type. If there are any invalid
measured values and limiting values or a wrong ICD file, restart the device.
SENTRON PAC5100/5200, 7KM5212/5412, Device Manual
E50417-H1040-C568-A1, Edition 03.2015
7 Operation at Use of a PC
7.3 Configuration of the Device
115