Siemens SENTRON PAC5200 Device Manual page 147

NOTE
Power Quality Report describes the output of the power quality report.
7.3.5.6 Recording Parameters
Default Settings and Setting Ranges
Table 7-16
Parameter
Start record option
Start time
Recording status
To change the recording parameter settings, proceed as follows:
✧
In the navigation window of the Recording and Reporting menu click Recording parameters.
Figure 7-42
✧
Select the parameter in the list box according to Table 7-16.
✧
After the parameterization click Send.
The parameters are transmitted to the device but not enabled yet (passive set of parameters).
SENTRON PAC5100/5200, 7KM5212/5412, Device Manual
E50417-H1040-C568-A1, Edition 03.2015
Reporting Parameters
Default Setting
Start next 10th minute
Configure Tab, Recording Parameters Input/Output Window (Excerpt)
Start next minute
Start next 10th minute
Start immediately
Start next hour
Start next day
- Display of the start time according to the settings
of the Date/time format, see Device and
Language.
- not settable
Recorder status display started or recorder
stopped
7 Operation at Use of a PC
7.3 Configuration of the Device
Setting Range
147