Siemens SENTRON PAC5200 Device Manual page 206

8 Operation at Use of the Display
8.4 Parameterization
Table 8-6
Bus protocol
Access rights for port 502
Keepalive time
Communication monitoring time
Set user port number
User port number
(only settable if Set user port number
is parameterized with yes)
Access right for user port
(only settable if Set user port number
is parameterized with yes)
1)
After enabling the parameter changes, any currently active Modbus TCP connections will be closed. The
Modbus TCP client must later re-open these connections.
206
Ethernet Communication Settings
Parameter
Ethernet Communication - Modbus TCP Bus Protocol
1)
1)
Default Setting
Modbus TCP none
Modbus TCP
full full
read only
10 s 0 s = switched off
1 s to 65,535 s
600 * 100 ms 0 s = none
100 ms to 6,553,400 ms
No No
Yes
10000 10,000 to 65,535
full full
read only
SENTRON PAC5100/5200, 7KM5212/5412, Device Manual
Setting Range
E50417-H1040-C568-A1, Edition 03.2015