Siemens SENTRON PAC5200 Device Manual page 164

7 Operation at Use of a PC
7.4 Value View and Evaluation
Measurement Output as Diagram or Table
✧
If you selected Diagram or Table for Measurement output, click on the Display button.
Dependent on the selection, the determined results will be displayed in a table or diagram. In multi-paged
tables you can navigate forward and back in the pages using the >> and << buttons. If you want to view
a certain page, enter the page at the bottom and click on show.
NOTE
When an event has occurred, with this setting the recordings are marked in red on the record list under Find
result list. And a message is showed under the list when event happen. For information about the flagging con-
cept, please refer to Functioning of the Measuring System according to IEC 61000-4-30.
Measurement Output as CSV File
✧
If you selected CSV for Measurement output, click on the Download button.
The measured values are downloaded as an CSV file and exported to the storage location you selected
(see Events, Measurement Output as CSV File).
164 SENTRON PAC5100/5200, 7KM5212/5412, Device Manual
E50417-H1040-C568-A1, Edition 03.2015