Access Rights - Siemens SENTRON PAC5200 Device Manual

5.5

Access Rights

Access Rights for Configuration and Maintenance
To determine access rights, you have to set up passwords when configuring the device. You have to specify
an activation password and a maintenance password; chapter 7.3.6.3 describes how to set up passwords.
The activation password is required to enable parameter changes in the device.
The maintenance password is required to make changes in the device using the Maintenance tab.
NOTE
If you do not specify new passwords, the factory-set default passwords (see chapter 7.3.6.3) are valid.
Access Rights for Communication
The access rights for the communication via Ethernet with Modbus TCP protocol are made for port 502 and
for the user port. You can assign either full access rights or read-only authorization; chapter 7.3.6.2 describes
the settings.
SENTRON PAC5100/5200, 7KM5212/5412, Device Manual
E50417-H1040-C568-A1, Edition 03.2015
5 Getting Started
5.5 Access Rights
77