Chapter 6 System Control Terminal Menus; Overview - ADTRAN Atlas 550 User Manual

Chapter 6

OVERVIEW

To do this...
Review and monitor general system information for the ATLAS 550. System Info on page 6-2.
Review and monitor system status for the ATLAS 550.
Set up the operational configuration for the ATLAS 550.
Update settings, transfer files, perform system diagnostics, and
reboot the ATLAS 550.
Review and configure settings for each installed module, including
the ATLAS 550 Base Unit.
Define and configure all layer 2 connections including Frame Relay
endpoints.
Define, configure, and monitor all ATLAS 550 Router functions.
Assign dedicated connections between any two ports in the
ATLAS 550.
Set global ATLAS 550 switch parameters or set individual
parameters for each port in ATLAS 550 that handles a switched
call.
61200305L1-1
System Control Terminal Menus
The terminal menu is the access point to all other operations. Each terminal
menu item has several functions and submenus that identify and provide ac-
cess to specific operations and parameters. Use the chart below to help you
select the appropriate terminal menu.
ATLAS 550 User Manual
Go to this menu...
System Status on page 6-3.
System Config on page 6-8.
System Utility on page 6-17.
Modules on page 7-1.
Packet Manager on page 8-1.
Router on page 9-1.
Dedicated Maps on page 10-1.
Dial Plan on page 11-1.
6-1