Table of Contents
Advertisement
Terminal Menu Operation and Structure
TERMINAL MENU STRUCTURE
The Express L768/L1.5 uses a multilevel menu structure containing both
menu items and data fields. All menu operations and data display in the ter-
minal menu window. The Express L768/L1.5 is shipped in the Factory Default
configuration. Connect any VT 100 or VT 220 type terminal emulator to the
maintenance port. The default rate is 9600 baud 8-N-1. The terminal emulator
can flow the Express L768/L1.5 off using software flow control. Hardware
flow control is not used.
The opening menu (the Main menu, or top-level menu) is the access point to
all other operations. Each Main menu item has several functions and sub-
menus to identify and access specific parameters. Figure 3-1 on page 16 shows
the top-level terminal menu.
In order to edit items in the terminal menus, you must have the appropriate security
level. Each menu description in this section indicates the required security level re-
quired for write access. The maintenance port is always at security level 0, giving full
access to all configuration items.
The Main menu contains the following options.
Configuration
The Configuration menu provides options to set up the operational configura-
tion for the Express L768/L1.5. See the section Configuration Menu on page 22
for detailed information on the available options.
61202192L1-1
Express L768/L1.5 User Manual
Chapter 3
15
Advertisement
Table of Contents
