The default setting is 0: no indications are sent.
AT+NNMI Neul New Message Indications
Set Command
AT+NNMI=<status>
Read Command
AT+NNMI?
Parameter
<status>
0
1
2
<length>
Decimal length of message
<data>
Data to be transmitted in hex string format
Example
AT+NNMI=1
OK
AT+NNMI?
+NNMI:1
OK
4.4. AT+NSMI Neul Sent Message Indications
This command sets or gets indications that are sent when an upstream message is sent to the CDP
server.
If sent message indications are turned on, the unsolicited informational response: +NSMI:<status> (e.g
+NSMI: SENT) will be issued when a new message is sent into NB-IoT stack. Refer to Chapter 6 for
possible <err> values.
The default setting is 0: no indications are sent.
BC95_AT_Commands_Manual
Response
OK
+CME ERROR: <err>
Response
+NNMI: <status>
OK
No indications, the default setting
Indications and message
Indications only
BC95 AT Commands Manual
Confidential / Released
NB-IoT Module Series
37 / 58