Calibration Result Monitoring - Quectel GNSS Module Series User Manual

NOTE
Please notify that the hybrid GNSS/DR navigation mode will not be available until a valid calibration is
done. Without a valid calibration, only single GNSS navigation is available.

4.3. Calibration Result Monitoring

The calibration result will be reported in an NMEA message. A approach to check the calibration status
message is shown by the following figure. For more information, see document [4].
Step 1: Enter a software command in the "Text Console" to filter out the NMEA message, as shown in
the figure below.
Step 2: When the fifth parameter becomes "1", it means that all calibrations have been completed.
LG69T(AA,AD)_EVB_User_Guide
Figure 6: LG69T (AA) Calibration Status
GNSS Module Series
18 / 29