Description Of Mms At Commands; At+Qmmscfg Configure Parameters Of Mms - Quectel EC2 Series Command Manual

2

Description of MMS AT Commands

2.1. AT+QMMSCFG Configure Parameters of MMS

The command can be used to configure PDP context ID, MMSC, proxy, character type and other MMS
parameters. If the Write Command only executes one parameter, it will query the current settings.
AT+QMMSCFG Configure Parameters of MMS
Test Command
AT+QMMSCFG=?
Write Command
AT+QMMSCFG="contextid"[,<contex
tID>]
Write Command
AT+QMMSCFG="mmsc"[,<URL>]
EC2x&EG9x&EM05_MMS_AT_Commands_Manual
EC2x&EG9x&EM05 MMS AT Commands Manual
Response
+QMMSCFG: "contextid",(1-16)
+QMMSCFG: "mmsc",<URL>
+QMMSCFG: "proxy",<gateway>,(1-65535)
+QMMSCFG:
"character",("ASCII","UTF8","UCS2","GBK")
+QMMSCFG:
"sendparam"[,(0-6),(0-3),(0,1),(0,1),(0-2),(0-4)]
+QMMSCFG: "supportfield",(0,1)
OK
Response
If <contextID> is not omitted:
OK
Or
+CME ERROR: <err>
If <contextID> is omitted, query the current settings:
+QMMSCFG: "contextid",<contextID>
OK
Response
If <URL> is not omitted:
OK
Or
+CME ERROR: <err>
If <URL> is omitted, query the current settings:
LTE Module Series
7 / 25