NOTE
The command will take effect after reboot, or by executing AT+CFUN=0 and AT+CFUN=1 consecutively.
2.1.2. AT+QCFGEXT="nipdcfg" Configure Parameters for NIDD Connection
AT+QCFGEXT="nipdcfg" Configure Parameters for NIDD Connection
Write Command
Query the current configuration for NIDD
connection:
AT+QCFGEXT="nipdcfg"
Write Command
Configure the parameters for NIDD
connection:
AT+QCFGEXT="nipdcfg",<type>[,<ap
n>[,<username>,<password>]]
Parameter
<type>
Non-IP outgoing data type.
0
MO Non-IP data type
1
MO Exception Non-IP data type
<apn>
String type. Access point name.
<username>
String type. User name of the selected APN.
<password>
String type. Password of the selected APN.
2.1.3. AT+QCFGEXT="nipd" Open or Close the NIDD Connection
AT+QCFGEXT="nipd" Open or Close the NIDD Connection
Write Command
Configure to open or close the NIDD
connection:
AT+QCFGEXT="nipd",<mode>[,<time
out>]
BG96_NIDD_AT_Commands_Manual
Response
+QCFGEXT: "nipdcfg",<type>,<apn>
OK
Response
OK
Response
OK
If <mode> is 1, the following URC is reported after the OK
response:
+QIND: "nipd","open",<err>
If there is an error related to ME functionality, response:
+CME ERROR: <err>
LTE Module Series
BG96 NIDD Commands Manual
7 / 13