At+Qfotadl=<Para> Upgrade Firmware When Delta Package Is Stored In Local File System - Quectel BG96 User Manual

3.2. AT+QFOTADL=<para> Upgrade Firmware When Delta Package is
Stored in Local File System
If the delta firmware package has already been stored in the module's file system, AT+QFOTADL=<para>
command should be executed to enable automatic firmware upgrade via DFOTA. Then the module will
upgrade the firmware automatically.
AT+QFOTADL=<para> Upgrade Firmware When Delta Package is Stored in Local
File System
Write Command
AT+QFOTADL=<para>
Parameter
<para> Integer type.
1
<percent> Integer type. The upgrade progress in percentage.
<err>
NOTES
1. "RESTORE" means the process of copying the upgraded firmware to the original partition from
backup partition.
2. The storage path for delta firmware package is /fota/update.zip. Both the path and the package name
cannot be modified. Customers can use the QEFS Explorer tool provided by Quectel to upload the
upgrade package.
3. If the module is powered down during "RESTORE", the module will automatically enter into forced
upgrade mode when power up next time and continue upgrade from "RESTORE". The upgrade
interface is shown as below:
BG96_DFOTA_User_Guide
Response
OK
+QIND: "FOTA","START"
+QIND: "FOTA","UPDATING",<percent>
+QIND: "FOTA","UPDATING",<percent>
...
+QIND: "FOTA","RESTORE",<percent>
+QIND: "FOTA","RESTORE",<percent>
...
+QIND: "FOTA","END",<err>
If there is any error, response:
ERROR
Start upgrade
Integer type. 0 means upgraded successfully. Any other value means an error.
Please refer to Chapter 5 for more details.
LTE Module Series
BG96 DFOTA User Guide
11 / 16