Analog Input Min/Max; A4 Maintenance; Trip Counters - GE 469 Instruction Manual

469
Motor Management Relay

Analog Input Min/Max

ANALOG INPUT
MIN/MAX

Trip Counters

TRIP
COUNTERS
6–24
PATH: ACTUAL VALUES A3 LEARNED DATA
[ ] ANALOG I/P 1
MIN: O Units
ANALOG I/P 1
MESSAGE
MAX: 0 Units
ANALOG I/P 2
MESSAGE
MIN: O Units
ANALOG I/P 2
MESSAGE
MAX: 0 Units
ANALOG I/P 3
MESSAGE
MIN: O Units
ANALOG I/P 3
MESSAGE
MAX: 0 Units
ANALOG I/P 4
MESSAGE
MIN: O Units
ANALOG I/P 4
MESSAGE
MAX: 0 Units
The 469 will learn the minimum and maximum values of the analog inputs since
they were last cleared. This information can be cleared with the
CLEAR DATA CLEAR ANALOG I/P MIN/MAX
present value of each analog input will be loaded as a starting point for both
minimum and maximum. The name of the input and the units will reflect those
programmed for each input.
The values shown here reflect the programmed analog input names. If no Analog
Inputs are programmed in
flash message appears when an attempt is made to enter this group of messages.

A4 Maintenance

PATH: ACTUAL VALUES A4 MAINTENANCE
[ ] TOTAL NUMBER OF
TRIPS: 0
INCOMPLETE SEQUENCE
MESSAGE
TRIPS: 0
INPUT SWITCH
MESSAGE
TRIPS: 0
TACHOMETER
MESSAGE
TRIPS: 0
OVERLOAD
MESSAGE
TRIPS: 0
SHORT CIRCUIT
MESSAGE
TRIPS: 0
MECHANICAL JAM
MESSAGE
TRIPS: 0
http://www.GEindustrial.com/multilin
ANALOG IN MIN/MAX
Range: –50000 to 50000
Range: –50000 to 50000
Range: –50000 to 50000
Range: –50000 to 50000
Range: –50000 to 50000
Range: –50000 to 50000
Range: –50000 to 50000
Range: –50000 to 50000
setpoint. When the data is cleared, the
, the
THIS FEATURE NOT PROGRAMMED
S12 ANALOG I/O
TRIP COUNTERS
Range: 0 to 50000
Range: 0 to 50000. Caused by the
Range: 0 to 50000 Caused by Remote,
Range: 0 to 50000. Caused by Digital
Range: 0 to 50000
Range: 0 to 50000
Range: 0 to 50000
A4 Maintenance
S1 469 SETUP
Reduced Voltage Start feature
Speed, Load Shed, Pressure,
Vibration, or General Purpose
Switch Trip features
Input set as Tachometer
GE Multilin