Using Enervista Viewpoint With The 469; Plug And Play Example - GE 469 Instruction Manual

Using EnerVista Viewpoint with the 469

Plug and Play Example

GE Multilin
FIGURE 4–10: Actual Values Display
Using EnerVista Viewpoint with the 469
EnerVista Viewpoint is an optional software package that puts critical 469
information onto any PC with plug-and-play simplicity. EnerVista Viewpoint connects
instantly to the 469 via serial, ethernet or modem and automatically generates
detailed overview, metering, power, demand, energy and analysis screens.
Installing EnerVista Launchpad (see previous section) allows the user to install a
fifteen-day trial version of EnerVista Viewpoint. After the fifteen day trial period you
will need to purchase a license to continue using EnerVista Viewpoint. Information
on license pricing can be found at http://www.enervista.com.
1. Install the EnerVista Viewpoint software from the GE EnerVista CD.
2. Ensure that the 469 device has been properly configured for either serial or
Ethernet communications (see previous sections for details).
3. Click the Viewpoint window in EnerVista to log into EnerVista Viewpoint. At this
point, you will be required to provide a login and password if you have not
already done so.
http://www.GEindustrial.com/multilin
469
Motor Management Relay
4–33