Panel Keying Example - GE 469 Instruction Manual

Using the Relay

Panel Keying Example

ACTUAL VALUES
Press the MESSAGE
ACTUAL VALUES
A1 STATUS
Press the MESSAGE
ACTUAL VALUES
A2 METERING DATA
Press the MESSAGE
ACTUAL VALUES
A3 LEARNED DATA
GE Multilin
The menu path to this value is shown as
. Setpoints and actual values messages are referred to in this
CURRENT DEMAND
manner throughout the manual.
For example, the
A3 LEARNED DATA
path representation describes the following key-press sequence: press the
TIME
MENU key until the actual value header appear on the display, MESSAGE
key, and then MESSAGE
then press the MESSAGE
press the MESSAGE or ENTER key to reach the
message and the corresponding actual value.
7. Press the MESSAGE key to display the next actual value message as shown
below:
LEARNED STARTING
CURRENT: 0 A
8. Pressing the MESSAGE
through all the actual value displays in this corresponding sub-page.
9. Pressing the MESSAGE key reverses the process described above and returns
the display to the previous level.
MOTOR
STARTING
10. Press the MESSAGE key twice to return to the
ACTUAL VALUES
A3 LEARNED DATA
The following figure gives a specific example of how the keypad is used to navigate
through the menu structure. Specific locations are referred to throughout this
manual by using a 'path representation'. The example shown in the figure gives the
key presses required to read the learned starting current denoted by the path
A3 LEARNED DATA MOTOR STARTING
Press the menu key until the relay displays the actual values page.
[ ]
or ENTER key
[ ]
key
[ ]
key
[ ] MOTOR STARTING
MESSAGE
http://www.GEindustrial.com/multilin
A2 METERING DATA
MOTOR STARTING
key until the
A3 LEARNED DATA
or ENTER key to display
MOTOR STARTING
or MESSAGE keys scrolls the display up and down
[ ]
A3 LEARNED DATA
[ ]
LEARNED STARTING CURRENT
[ ]
MESSAGE
MESSAGE
469
Motor Management Relay
DEMAND METERING
LEARNED ACCELERATION
or ENTER
message is displayed,
message, then
LEARNED ACCELERATION TIME
page header.
.
LEARNED ACCELERATION
TIME: 0.0 s
LEARNED STARTING
CURRENT: 0 A
1–5