GE 469 Instruction Manual page 104

469
Motor Management Relay
4–34
FIGURE 4–11: EnerVista Viewpoint Main Window
4. Click the Device Setup button to open the Device Setup window, then click the
Add Site button to define a new site.
5. Enter the desired site name in the Site Name field. If desired, a short
description of site can also be entered along with the display order of devices
defined for the site. Click the OK button when complete. The new site will
appear in the upper-left list in the EnerVista 469 Setup window.
6. Click the Add Device button to define the new device.
7. Enter the desired name in the Device Name field and a description (optional)
of the site.
8. Select the appropriate communications interface (Ethernet or Serial) and fill in
the required information for the 469. See Connecting EnerVista 469 Setup to
the Relay on page 4–11 for details.
FIGURE 4–12: Device Setup Screen (Example)
9. Click the Read Order Code button to connect to the 469 device and upload the
order code. If an communications error occurs, ensure that communications
values entered in the previous step correspond to the relay setting values.
http://www.GEindustrial.com/multilin
Using EnerVista Viewpoint with the 469
GE Multilin