Analog Input Min/Max - GE Multilin 489 Instruction Manual

CHAPTER 6: ACTUAL VALUES
Note
6.4.3

Analog Input Min/Max

ANALOG INPUT
MIN/MAX
Note
489 GENERATOR MANAGEMENT RELAY – INSTRUCTION MANUAL
Courtesy of NationalSwitchgear.com
RTD #11
MESSAGE
MAX. TEMP.: 40°C
RTD #12
MESSAGE
MAX. TEMP.: 40°C
These messages are seen only if the corresponding RTDs are programmed. The actual
messages reflect the RTD Names as programmed.
The 489 will learn the maximum temperature for each RTD. This information can be
cleared using the
S1 489 SETUP
RTD maximums will not update if a digital input programmed as Test Input is shorted. If no
RTDs are programmed in the
flash message will appear when an attempt is made to enter this
NOT PROGRAMMED
group of messages.
PATH: ACTUAL VALUES A3 LEARNED DATA
[ ] ANALOG I/P 1
MIN: O Units
ANALOG I/P 1
MESSAGE
MAX: 0 Units
ANALOG I/P 2
MESSAGE
MIN: O Units
ANALOG I/P 2
MESSAGE
MAX: 0 Units
ANALOG I/P 3
MESSAGE
MIN: O Units
ANALOG I/P 3
MESSAGE
MAX: 0 Units
ANALOG I/P 4
MESSAGE
MIN: O Units
ANALOG I/P 4
MESSAGE
MAX: 0 Units
These messages are seen only if the corresponding Analog Inputs are programmed. The
actual messages reflect the Analog Input Names as programmed.
The 489 learns the minimum and maximum values of the analog inputs since they were
last cleared. This information can be cleared using the
setpoint. When the data is cleared, the present value of each
CLEAR ANALOG I/P MIN/MAX
analog input will be loaded as a starting point for both minimum and maximum. The name
of the input and the units will reflect those programmed for each input. Analog Input
minimums and maximums will not update if a digital input programmed as Test Input is
shorted.
Range: –50 to 250°C
Range: –50 to 250°C
CLEAR DATA CLEAR RTD MAXIMUMS
setpoints page, the
S7 RTD TEMPERATURE
ANALOG INPUT MIN/MAX
Range: –50000 to 50000
Range: –50000 to 50000
Range: –50000 to 50000
Range: –50000 to 50000
Range: –50000 to 50000
Range: –50000 to 50000
Range: –50000 to 50000
Range: –50000 to 50000
S1 489 SETUP
setpoint. The
THIS FEATURE
CLEAR DATA
6–23