Demand Metering; Analog Inputs - GE 469 Instruction Manual

469
Motor Management Relay

Demand Metering

DEMAND
METERING

Analog Inputs

ANALOG
INPUTS
6–12
PATH: ACTUAL VALUES A2 METERING DATA
[ ] CURRENT
DEMAND: 0 Amps
REAL POWER
MESSAGE
DEMAND: 0 kW
REACTIVE POWER
MESSAGE
DEMAND: 0 kvar
APPARENT POWER
MESSAGE
DEMAND: 0 kVA
PEAK CURRENT
MESSAGE
DEMAND: 0 Amps
PEAK REAL POWER
MESSAGE
DEMAND: 0 kW
PEAK REACTIVE POWER
MESSAGE
DEMAND: 0 kvar
PEAK APPARENT POWER
MESSAGE
DEMAND: 0 kVA
The values for current and power demand are shown. The power demand values are
not shown if the
VT RATIO
cleared with the
S1 469 SETUP
Demand is shown only for positive real and positive reactive power.
PATH: ACTUAL VALUES A2 METERING DATA
[ ] ANALOG I/P 1
0 Units
ANALOG I/P 2
MESSAGE
0 Units
ANALOG I/P 3
MESSAGE
0 Units
ANALOG I/P 4
MESSAGE
0 Units
ANALOG 1-2
MESSAGE
0 Percent
ANALOG 1-2
MESSAGE
0 Units
ANALOG 3-4
MESSAGE
0 Percent
ANALOG 3-4
MESSAGE
0 Units
The values for analog inputs are shown here. The name of the input and the units
will reflect those programmed for each input. If no analog inputs are programmed in
S12 ANALOG I/O ANALOG INPUT 1(4)
message will appear when an attempt is made to enter this group of messages.
http://www.GEindustrial.com/multilin
DEMAND METERING
Range: 0 to 100000 A
Range: 0 to 99999 kW
Range: 0 to 99999 kvar
Range: 0 to 65535 kVA
Range: 0 to 100000 A
Range: 0 to 99999 kW
Range: 0 to 99999 kvar
Range: 0 to 65535 kVA
is programmed as "None". Peak Demand information is
CLEAR DATA CLEAR PEAK DEMAND DATA
ANALOG INPUTS
Range: –50000 to 50000. Seen only if
Range: –50000 to 50000. Seen only if
Range: –50000 to 50000. Seen only if
Range: –50000 to 50000. Seen only if
Range: –5100 to 4900%. Seen only if
Range: –100000 to 100000. Seen only if
Range: –5100 to 4900%. Seen only if
Range: –100000 to 100000. Seen only if
, the
THIS FEATURE NOT PROGRAMMED
A2 Metering Data
setpoint.
Analog Input is programmed.
Analog Input is programmed.
Analog Input is programmed.
Analog Input is programmed.
Analog In Diff 1-2 set to %Diff
Analog In Diff 1-2 is Abs Diff
Analog In Diff 3-4 set to %Diff
Analog In Diff 3-4 is Abs Diff
flash
GE Multilin