Analog Input Min/Max - GE 469 Instruction Manual

CHAPTER 6: ACTUAL VALUES
6.4.4

Analog Input Min/Max

INPUT
469 MOTOR MANAGEMENT RELAY – INSTRUCTION MANUAL
The values in this menu reflect the RTD names as programmed If no RTDs are programmed
in
S8 RTD TEMPERATURE
appear when an attempt is made to enter this group of messages.
PATH: ACTUAL VALUES
ANALOG
[ ]
MIN/MAX
MESSAGE
MESSAGE
MESSAGE
MESSAGE
MESSAGE
MESSAGE
MESSAGE
The 469 will learn the minimum and maximum values of the analog inputs since they were
last cleared. This information can be cleared with the
CLEAR ANALOG I/P MIN/MAX
analog input will be loaded as a starting point for both minimum and maximum. The name
of the input and the units will reflect those programmed for each input.
The values shown here reflect the programmed analog input names. If no Analog Inputs
are programmed in
S12 ANALOG I/O
message appears when an attempt is made to enter this group of messages.
, the
THIS FEATURE NOT PROGRAMMED
A3 LEARNED DATA ANALOG IN MIN/MAX
ANALOG I/P 1
MIN: O Units
ANALOG I/P 1
MAX: 0 Units
ANALOG I/P 2
MIN: O Units
ANALOG I/P 2
MAX: 0 Units
ANALOG I/P 3
MIN: O Units
ANALOG I/P 3
MAX: 0 Units
ANALOG I/P 4
MIN: O Units
ANALOG I/P 4
MAX: 0 Units
settings. When the data is cleared, the present value of each
, the
THIS FEATURE NOT PROGRAMMED
flash message will
Range: –50000 to 50000
Range: –50000 to 50000
Range: –50000 to 50000
Range: –50000 to 50000
Range: –50000 to 50000
Range: –50000 to 50000
Range: –50000 to 50000
Range: –50000 to 50000
S1 469 SETUP CLEAR DATA
flash
6–29