GE 469 Instruction Manual page 95

Advanced EnerVista 469 Setup Features
GE Multilin
3. To view the captured waveforms, click the Launch Viewer button. A detailed
Waveform Capture window will appear as shown below:
TRIGGER TIME & DATE
VECTOR DISPLAY SELECT
Display the time & date of the
Click here to open a new graph
Trigger
to display vectors
Display graph values
at the corresponding FILE NAME
cursor line. Cursor
Indicates the
lines are identified by file name and
their colors. complete path
(if saved)
FIGURE 4–7: Waveform Capture Window Attributes
4. The red vertical line indicates the trigger point of the relay.
5. The date and time of the trigger is displayed at the top left corner of the
window. To match the captured waveform with the event that triggered it, make
note of the time and date shown in the graph. Then, find the event that
matches the same time and date in the event recorder. The event record will
provide additional information on the cause and the system conditions at the
time of the event. Additional information on how to download and save events is
shown in Event Recorder on page 4–29.
6. From the window main menu bar, press the Preference button to change the
graph attributes.
http://www.GEindustrial.com/multilin
Motor Management Relay
CURSOR LINE POSITION
Indicate the cursor line position
in time with respect to the
trigger time
CURSOR
LINES
To move lines locate the mouse pointer
over the cursor line then click and drag
the cursor to the new location.
Preference button
469
DELTA
Indicates time difference
between the two cursor lines
TRIGGER LINE
Indicates the
point in time for
the trigger
4–25