GE 469 Instruction Manual page 17

Changing Setpoints
SETPOINTS
MESSAGE
Press
SETPOINTS
S1 469 SETUP
MESSAGE
Press
SETPOINTS
S2 SYSTEM SETUP
GE Multilin
To set the ground CT ratings, modify the
and the
GROUND CT S2 SYSTEM SETUP
setpoints as shown below.
Press the MENU key until the relay displays the setpoints menu header.
[ ]
ENTER
or
[ ]
Press
[ ] CURRENT
MESSAGE
SENSING
ENTER
or
displayed, or enter the value directly
http://www.GEindustrial.com/multilin
S2 SYSTEM SETUP
CURRENT SENSING
Press
[ ]
MESSAGE
ENTER
or
Press
MESSAGE
Press
MESSAGE
VALUE
Press the keys until
"5 A Secondary" is displayed.
Press the ENTER key to store the
setpoint.
Press
MESSAGE
VALUE
Press the keys until 50 A is
via the numeric keypad.
ENTER
Press the key to store the
setpoint.
469
Motor Management Relay
CURRENT SENSING
GROUND CT PRIMARY
PHASE CT PRIMARY:
600 A
MOTOR FULL LOAD AMPS
FLA: 318 A
GROUND CT:
Multilin CT 50/0.025
GROUND CT:
5 A Secondary
NEW SETPOINT HAS
BEEN STORED
GROUND CT PRIMARY:
100 A
GROUND CT PRIMARY:
50 A
NEW SETPOINT HAS
BEEN STORED
1–9