Viewing Actual Values - GE 469 Instruction Manual

Advanced EnerVista 469 Setup Features

Viewing Actual Values

GE Multilin
This window allows the desired addresses to be written to User Map locations.
The User Map values that correspond to these addresses are then displayed.
You can view real-time relay data such as input/output status and measured
parameters. From the main window menu bar, selecting Actual Values opens a
window with tabs, each tab containing data in accordance to the following list:
1. Motor and System Status:
– Motor status either stopped, starting, or running. It includes values such as
motor load, thermal capacity used, motor speed, and instantaneous values
of power system quantities.
– The status of digital inputs.
– Last trip information, including values such as cause of last trip, time and
date of trip, motor speed and load at the time of trip, pre-trip temperature
measurements, pre-trip analog inputs values, and pre-trip instantaneous
values of power system quantities.
– Active alarms.
– Relay date and time.
– Present blocking conditions.
– General system status indication including the status of output relays,
active pickup, alarm and trip conditions.
2. Metering Data:
– Instantaneous current measurements including phase, differential, unbal-
ance, ground, average, motor load, and differential currents.
– RTD Temperatures including hottest stator RTD.
– Instantaneous phase to phase and phase to ground voltages (depending on
the VT connections), average voltage, and system frequency.
– Motor Speed
http://www.GEindustrial.com/multilin
469
Motor Management Relay
4–31