Analog In Min/Max - GE 489 Instruction Manual

5.4 A3 LEARNED DATA
T

ANALOG IN MIN/MAX

T
[ENTER] for more
The 489 learns the minimum and maximum values of the analog inputs since they were last cleared. This information can
5 be cleared using the
S1 489 SETUP \ CLEAR DATA \ CLEAR ANALOG I/P MIN/MAX
value of each analog input will be loaded as a starting point for both minimum and maximum. The name of the input and the
units will reflect those programmed for each input. Analog Input minimums and maximums will not update if a digital input
programmed as Test Input is shorted.
If no Analog Inputs are programmed in the
message will appear when an attempt is made to enter this group of messages.
5-18
ð
ANALOG I/P 1
ENTER
MIN: O Units
ESCAPE
ANALOG I/P 1
ESCAPE
MAX: 0 Units
MESSAGE
ANALOG I/P 2
ESCAPE
MIN: O Units
MESSAGE
ANALOG I/P 2
ESCAPE
MAX: 0 Units
MESSAGE
ANALOG I/P 3
ESCAPE
MIN: O Units
MESSAGE
ANALOG I/P 3
ESCAPE
MAX: 0 Units
MESSAGE
ANALOG I/P 4
ESCAPE
MIN: O Units
MESSAGE
ANALOG I/P 4
ESCAPE
MAX: 0 Units
MESSAGE
setpoints menu, the
S11 ANALOG I/O
489 Generator Management Relay
5 ACTUAL VALUES
5.4.3 ANALOG IN MIN/MAX
Range: –50000 to 50000. Not seen if Analog Input is
programmed as None. Message reflects Analog
Input Name as programmed.
Range: as for ANALOG I/P 1 MIN above
Range: as for ANALOG I/P 1 MIN above
Range: as for ANALOG I/P 1 MIN above
Range: as for ANALOG I/P 1 MIN above
Range: as for ANALOG I/P 1 MIN above
Range: as for ANALOG I/P 1 MIN above
Range: as for ANALOG I/P 1 MIN above
setpoint. When the data is cleared, the present
THIS FEATURE NOT PROGRAMMED
GE Power Management
flash