GE 469 Instruction Manual page 12

469
Motor Management Relay
1–4
information available in that page. Pressing the MESSAGE
scroll through all the available actual values page headers. Actual values page
headers look as follows:
ACTUAL VALUES
A1 STATUS
To enter a given actual values page, press the MESSAGE
MESSAGE or MESSAGE keys to scroll through sub-page headers until the required
message is reached. The end of a page is indicated by the message
The beginning of a page is indicated by the message
Similarly, to access additional sub-pages, press the MESSAGE
the first sub-page, and then the MESSAGE
available sub-pages, until the desired message is reached. The process is identical
for both setpoints and actual values.
The following procedure illustrates the key sequence to access the Current Demand
actual values.
1. Press the MENU key until you reach the actual values main menu.
2. Press MESSAGE or ENTER key to enter the first actual values page, and then the
MESSAGE or MESSAGE
page appears.
ACTUAL VALUES
A2 METERING DATA
3. Press the MESSAGE or ENTER key to display the first sub-page heading for the
Metering Data actual values page:
CURRENT
METERING
Pressing the MESSAGE
through the sub-page headers. Pressing the
page heading will return the display to the heading of the corresponding
setpoint or actual value page, and pressing it again, will return the display to
the main menu header.
4. Press the MESSAGE key until the
DEMAND
METERING
At this point, pressing MESSAGE
this sub-page. If instead you press the MESSAGE
previous sub-page heading. In this case,
POWER
METERING
5. When the symbols and
sub-pages are available and can be accessed by pressing the MESSAGE
key. Pressing MESSAGE
ing displays the following:
CURRENT
DEMAND: 0 Amps
Pressing MESSAGE key returns to the Demand Metering sub-page heading.
6. Press the MESSAGE key to display the next actual value of this sub-page.
Actual values and setpoints messages always have a colon separating the name
of the value and the actual value or setpoint. This particular message displays
the current demand as measured by the relay.
http://www.GEindustrial.com/multilin
[ ]
TOP OF PAGE
or MESSAGE
key to scroll through pages, until the
[ ]
[ ]
or MESSAGE keys will scroll the display up and down
MESSAGE or ESCAPE key at any sub-
DEMAND METERING
[ ]
or ENTER key will display the messages under
[ ]
appear on the top line, it indicates that additional
[ ]
or ENTER while at the Demand Metering sub-page head-
Using the Relay
or MESSAGE keys will
or ENTER key. Press the
.
END OF PAGE
.
or ENTER key to enter
keys to scroll through the
A2 METERING DATA
sub-page heading appears.
key, it will return to the
or ENTER
GE Multilin