AGFA CR Series Service Manual page 78

DD+DIS155.11E
(76) Select Activate Configuration and follow the further instructions on the
screen.
NOTE:
After activation of the configuration the NX application software resets and starts up
automatically. The digitizer status LED changes from red to green.
The controlled version of this document is available from the Agfa HealthCare Library. Any printed copy of this document is uncontrolled.
Edition 1, Revision 4
03-2013
Controls, Connections, and Setup Procedures
DOCUMENT CONTROL NOTE:
CR 10-X / CR Reader / CR 12-X / CR Advanced Reader
Type 5151 / 100 / 110 / 200 / 210
Figure 60
Agfa Company Confidential
Chapter 1 / Page 42 of 47