AGFA CR Series Service Manual page 193

Digitizer
Table of Contents

Advertisement

DD+DIS155.11E
CODE
ARC4200
The controlled version of this document is available from the Agfa HealthCare Library. Any printed copy of this document is uncontrolled.
Edition 1, Revision 2
03-2013
Calculated Image Plate length reached a warning limit.
Meaning: The automatic speed calibration reached a warning limit.
There may be distortions on scanned image.
Reason 1: Relocation or transportation of the digitizer.
This can have a slight influence on transport mechanics.
Cure 1: Try to repeat new scan cycles with the same IP.
The speed calibration is automatically updated during a scan cycle.
Reason 2: Ambient Light influences detection of begin of scan (Barcode).
Cure 2: Protect the digitizer from direct sunlight.
Reason 3: The replacement of modules leads at first scan cycle to a new
correction value.
Cure 3: Repeat scan cycles with the same IP.
The speed calibration is automatically updated during a scan cycle.
Reason 4: IP Barcode Label not at the defined position.
Cure 4: Repeat scan cycles with the same IP.
If the message only happens at a change between different IPs/Cassettes then
the difference between the IPs is too large.
Check the IPs for proper mounted Barcode Labels. Replace damaged IP.
Reason 5: IP damaged. IP transportation not steady and stable.
This causes a large variation in the correction from one scan cycle to the next
cycle.
Cure 5: Check the image plate for damages.
Replace damaged IP.
Reason 6: Slow Scan mechanics damaged. IP transportation not steady
and stable. This causes a large variation in the correction from one scan cycle
to the next cycle.
Cure 6: Check belt tension of Slow Scan drum drive. Check the Slow Scan
mechanics for damages.
Check 'Slow Scan Belt'. Check the magnetic drum for damages.
Replace 'Slow Scan Plate with Belt Tensioner'. Replace 'Slow Scan Belt'.
DOCUMENT CONTROL NOTE:
CR 10-X / CR Reader / CR 12-X / CR Advanced Reader
Type 5151 / 100 / 110 / 200 / 210
Repair and Service
Troubleshooting
Message
Chapter 3.3 / 45 of 46
Agfa Company Confidential

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Cr 10-xCr readerCr 12-xCr advanced reader

Table of Contents