AGFA CR Series Service Manual page 67

DD+DIS155.11E
(33) Check both options:
- Welcome screen and
system accounts
- New user accounts
(34) Select: <OK>
(35) Start the browser at the NX
workstation (A).
(36) Enter the digitizer IP address
192.192.192.192 in the address
window (B).
(37) Enter username and password
obtained in the digitizer web based
training.
IMPORTANT:
When installing the digitizer at SE, do not install the error viewer. SE has an error
viewer already pre-installed.
The controlled version of this document is available from the Agfa HealthCare Library. Any printed copy of this document is uncontrolled.
Edition 1, Revision 4
03-2013
Controls, Connections, and Setup Procedures
DOCUMENT CONTROL NOTE:
CR 10-X / CR Reader / CR 12-X / CR Advanced Reader
Type 5151 / 100 / 110 / 200 / 210
Figure 36
B
192.192.192.192
Authentication Required
User Name:
C
Password:
OK Cancel
Start
Start
Figure 37
Chapter 1 / Page 31 of 47
Agfa Company Confidential
A
515101zf.cdr