AGFA CR Series Service Manual page 64

DD+DIS155.11E
(16) Set computer name: DefaultNX
(17) Select <OK>.
(18) Reboot the computer when
requested.
(19) Login again using the service
account.
(20) Select: Start  All Programs
 Agfa  NX  Service 
Installtools  HostName
Synchronization Tool
(21) Select: <Synchronise>
(22) Wait until message is displayed:
"Synchronization of hostname
succeeded"
(23) Close the tool.
The controlled version of this document is available from the Agfa HealthCare Library. Any printed copy of this document is uncontrolled.
Edition 1, Revision 4
03-2013
Controls, Connections, and Setup Procedures
DOCUMENT CONTROL NOTE:
CR 10-X / CR Reader / CR 12-X / CR Advanced Reader
Type 5151 / 100 / 110 / 200 / 210
Figure 30
Figure 31
Chapter 1 / Page 28 of 47
Agfa Company Confidential