AGFA CR Series Service Manual page 183

DD+DIS155.11E
CODE
ARC3200
ARC3201
The controlled version of this document is available from the Agfa HealthCare Library. Any printed copy of this document is uncontrolled.
Edition 1, Revision 2
03-2013
Serial Number consistency check failed.
Meaning: USB stick error during repair action.
No valid digitizer serial number found on USB flash drive, PMI board or
a mismatch between stored device serial numbers.
The User has inserted a USB flash drive from another digitizer AND
the PMI board has been exchanged.
Reason 1: New or incorrect USB flash drive inserted AND PMI board
exchanged.
Cure 1: Insert correct USB flash drive.
Restart the device and follow the instructions.
Reason 2: New or incorrect USB flash drive inserted AND PMI board
exchanged.
Cure 2: Configure Digitizer according to service manual.
Restart the digitizer and follow the instructions on processing station.
Serial Number consistency check failed.
Meaning: USB stick operating conditions error.
No valid device serial number found on USB flash memory AND
no valid device serial number found on PMI board.
The User has inserted a USB flash memory from another digitizer,
the USB flash memory is not readable or the USB flash memory is empty AND
the PMI board has been exchanged or data on PMI board have been
destroyed.
Reason 1: New or incorrect USB flash memory inserted AND PMI board
exchanged.
Cure 1: Use the correct USB flash memory and press confirm to use
configuration data from USB flash drive.
Reason 2: New or incorrect USB flash memory inserted AND data on PMI
board deleted.
Cure 2: If you already use the correct USB flash memory and this message is
displayed a second time, reinstall the Digitizer software with option format.
DOCUMENT CONTROL NOTE:
CR 10-X / CR Reader / CR 12-X / CR Advanced Reader
Type 5151 / 100 / 110 / 200 / 210
Repair and Service
Troubleshooting
Message
Chapter 3.3 / 35 of 46
Agfa Company Confidential