AGFA CR Series Service Manual page 70

DD+DIS155.11E
(54) After the reboot select OK at error
message:
"No Digitizer configured ! ..."
(55) Double-click the Start NX
Configurator icon on the
desktop.
(56) Select: Load active
configuration
The controlled version of this document is available from the Agfa HealthCare Library. Any printed copy of this document is uncontrolled.
Edition 1, Revision 4
03-2013
Controls, Connections, and Setup Procedures
DOCUMENT CONTROL NOTE:
CR 10-X / CR Reader / CR 12-X / CR Advanced Reader
Type 5151 / 100 / 110 / 200 / 210
Figure 44
Figure 45
Chapter 1 / Page 34 of 47
Agfa Company Confidential