AGFA CR Series Service Manual page 33

DD+DIS238.06E
Performing service activities at devices emitting laser radiation:
WARNING:
Laser radiation. Eye injury possible.
INSTRUCTION:
•
Strictly observe the warning notes in the service manual of devices emitting laser
radiation (See service manual chapter describing Safety Guidelines / General
Repair Instructions) and at the corresponding steps of instructions.
•
Strictly observe the warning labels at the modules emitting laser light. For the
meaning of the labels refer to section 3.3 in this document.
•
Do not look into the laser beam.
•
Do not open modules containing a laser. Only open modules containing a laser if
explicitly instructed to do so.
•
Do not keep tools in the laser beam unless explicitly instructed to do so.
•
Make yourself familiar with the path of the laser light and the conditions, when the
laser beam is switched on. Refer to the Functional Description in the
corresponding service manual.
•
Do not operate modules with laser outside the device.
Sharp edges:
CAUTION:
Sharp edges inside the device: Cut or abrasion possible.
Be careful at maintenance and replacement of parts.
Cleaning optical elements:
CAUTION:
Image artifacts possible after cleaning optical elements.
When cleaning optical elements follow the service manual precisely.
Edition 1, Revision 3
07-2009
The controlled version of this document resides on MedNet. Any printed copy of this document is uncontrolled.
Generic Safety Directions for HealthCare Imaging Products
DOCUMENT CONTROL NOTE:
Generic Safety Directions
Page 25 of
Agfa Company Confidential
28