AGFA CR Series Service Manual page 186

DD+DIS155.11E
CODE
ARC4001
ARC4002
ARC4003
The controlled version of this document is available from the Agfa HealthCare Library. Any printed copy of this document is uncontrolled.
Edition 1, Revision 2
03-2013
Software error.
Meaning: A software error occurred. Digitizer cannot proceed the current
action.
Reason 1: A bug in the software at the current action.
Cure 1: Restart digitizer to return IP into cassette and release cassette.
Install the newest digitizer software.
Reason 2: A bug in the software causing system stop. Restart not successfully.
Cure 2: Clear IP jam manually. Install the newest digitizer software.
Missing software functionality.
Meaning: The installed software does not support this asked functionality.
Reason 1: Software version is too old.
Cure 1: Install the newest digitizer software.
Software error
Meaning: A software error is causing system stop.
Reason 1: A bug in the software causing system stop. Restart not successfully
Cure 1: Clear IP jam manually. Install the newest digitizer software.
DOCUMENT CONTROL NOTE:
CR 10-X / CR Reader / CR 12-X / CR Advanced Reader
Type 5151 / 100 / 110 / 200 / 210
Repair and Service
Troubleshooting
Message
Chapter 3.3 / 38 of 46
Agfa Company Confidential